The
AF Component 2 PRO
formula was
created by qualified specialists based on many years of experience
.
Regularly dosed fluids provides adequate level of carbonate hardness (KH 6.5-8.5 dKH) in the aquarium.
The most concentrated fluids
to meet all the aquarium’s needs.
NOTE: Product picture is ilustrative
AF COMPONENT 2 PRO
The AF Component 2 PRO formula was created by qualified specialists based on many years of experience .
Regularly dosed fluids provides adequate level of carbonate hardness (KH 6.5-8.5 dKH) in the aquarium.
The most concentrated fluids to meet all the aquarium’s needs.
PRODUCT FEATURES
The highest efficiency set of crucial elements
Experience based formula
Raises & stabilizes pH level
The most concentrated fluids to meet all the aquarium’s needs
Provides ionic balance
DOSAGE
All the fluids should be dosed equally based on Ca, KH and Mg consumption.
Regularly test your water and establish the optimal dose basing on analysis results . With average SPS corals stock, the recommended Components Pro dose is 12 ml per 100 liters of water daily . When water parameters aren’t in the recommended range use one of the Aquaforest Lab additives (Ca Plus, Mg Plus, KH Plus) until reaching the desired levels.
Component 1 PRO contains: Ca, Sr, Fe, Mn, Cu, Zn, Ni, Cr, Co, Mo (25 ml / 100 l raises Ca by 9 ppm).
Component 2 PRO contains: HCO3-, F, I (25 ml / 100 l raises KH by 1.3 dKH – Alk 0.46 meq / l).
Component 3 PRO contains: mineral salts, Mg, S, K, B, Sr, Li (25 ml / 100 l increases Mg by 0.76 ppm).
Due to the high concentration of the product, we recommend regular maintenance of the dosing lines .
Due to the high product concentration , a white, gelatinous precipitate may appear after Component 2 Pro contacts the water . This is completely natural and safe for the aquatic life.
In order to facilitate the dissolution of it, the Component 2 Pro dosing pump outlet should be placed in a high water flow . It’s best for your corals to split the daily dose into as many small doses as it’s possible.
