Leakage interface, for connecting leakage sensors to ProfiLux.
Play it safe with the flow early warning system of GHL:
If a leakage occurs, the ProfiLux computer can warn you via an acoustic signal, SMS, and/or email. If desired, it can also turn on/off specific devices in-advance.
A leak interface is required to connect leakage sensors. Any number of sensors can be connected to the interface.
- Incl. (1.5 m) connection cable to Leakage-Interface
- 2 mounting holes
- A second connector allows you to daisy-chain several leakage sensors to increase safety with additional measuring points
Leak sensors only detect conductive water and are not suitable for use with osmosis water.
Warning: Sensor must not be submerged! Only the 80 contacts on the bottom side should be moisturized.