Gryphon AquaSaw C-40CR-XL
This Corrosion Resistant AquaSaw XL is designed for use with salt water and is generally used to cut corals. It is based upon the regular C-40, but has improvements designed to reduce maintenance when the saw is used in a corrosive environment, such as with salt water. ¨
A 13,9cm (5.5″) vertical clearance, with the upper blade guide removes, allows cutting of most small and medium sized corals.
Features
- Simple construction with few moving parts
- Motor has sealed bearing for improved resistance to corrosion
- New High Speed Motor for fastest cutting available
- Direct drive – no belts or pulleys
- Powerful motor located on top, away from the water
- A shield is provided around the bottom of the motor to deflect salt water splash
- Huge water reservoir under the work surface
- One square foot of unobstructed work surface
- Under table blade guide and new blade guide above table.
- Metal parts are stainless steel or hard anodized aluminum
- Ships with stainless steel blade, however the saw can use any Gryphon blade
Specifications
- Model: AquaSaw
- Vertical Clearance: 13,9cm (5.5″) without upper guide
- Motor: 1/3 hp Direct Drive DC
- Blade Speed: 64 km /h (40 miles per hour)
- Platform Area: 30,5 cm2 (One square foot)
- Coolant System: Recirculating tap or salt water
– no water required - Coolant Reservoir: 25 x 22,7 cm (10″ x 9″)
- Tension Adjustment: Single Knob
- Blade Dimensions: 106,3cm (42″) Circumference, 0,05cm (0.02″) wide, 0,35cm (0.14″) deep
- Manufacturer Warranty: 2 years
