Because of supply bottleneck at the
electronic component market available in summer 2022 !!!for aquariums up to 2.000 literhard facts Bubble King® DeLuxe 250 internal:
with 10V connection
adjustable Red Dragon® 3 Mini Speedy skimmer pump 50 Watt 1.500 l/h
motor speed adjustable: 300-3.000 1/min
Base plate: Ø 28,5 cm / height ~ 64 cmTechnical data Bubble King® DeLuxe 250 internal:
Water level: ~ 180 mm up to ~ 270 mm
Weight skimmer: 13 kg inclusiv pump
Dimension skimmer: 340 mm wide / 455 mm length / ~ 640 mm height Data_sheet.pdf Spare_parts_and_accessories.pdf
Operating_and_maintenance_manual.pdf
Also with conventional Bubble King® Red Dragon® 1 not-adjustable pump available.Red Dragon® 3 Mini Speedy pump 50 Watt / 1.500 l/h Technical data Red Dragon® 3 Mini Speedy pump 50 Watt / 1.500 l/h air intake:
Skimmer-pump:
Motor speed adjustable Bubble King Red Dragon® 3 Mini Speedy pump 50 Watt 1.500 l/h
Delivery rate adjustable: max. ~ 1.500 l/h Air inlet and max. ~ 4.000 l/h) Water inlet
Wattage – active power: P = min. 15Watt – max. 60 Watt
speed adjustable Brushless DC pump
Intake side: Nozzle with ozone & air plug
Pressure side: reducing ring Ø 32/25 mm
Operating voltage: 230 Volt 50 Hz (also in 110V/60Hz available)
Protection class pump: IP 68 control unit: IP 66
Weight pump: 3,5 kg
Height of intake side: center 60 mm
Dimension pump: 100 mm wide / 210 mm length / ~ 140 mm height
Dimension control unit: 120 mm wide / 160 mm length / ~ 65 mm height Data_sheet_and_spare_parts.pdf Operating_and_maintenance_manual.pdfSaltwater resistant M6 grade 2 titanium screwsSaltwater resistant parabolic rubber feet for acoustic decouplingExtreme low noise brushless DC skimmer-pump with grouted power electronicsHigh efficient technology “Made in Germany”compact dimensionsHigh performance ceramics bearings and hollow shaft for bypass purging in the rotor housingOnly saltwater resistant pump with titanium rotor, titanium stator and shrivelled bearingsEasy usage and maintenance. Low risk of calcification due to polished titanium parts and compulsory purgeingHeavy and massive craftsmanship against vibrations and oscillationCE conformity, developed and built according to VDE guidelines/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
The connection of a controller/computer is prepared in each pump!
Prepared for connection to an aquarium computer (E.g. GHL) via a 0-10V interface.
The additional controller, for the connection to the computer, costs 159€ (incl. all connection cables and main adaptor)Tested so far folowing these computers:
GHL ProfiLux 3.1 and from Neptune Systems the Apex Aqua Controller.Compatible with following brands:
http://www.neptunesystems.com/
https://www.reefai.com///////////////////////////////////////////////////////////////////////////////
Functioning of the electronics:
Once a voltage > 0,5V to the 10V interface is, the interface adapter takes over controlling and the system and lock(disable) the buttons on the controller. Voltage will be < 0,5V normal controller operation and the buttons are again released. So can the interface adapter stay connected without performing a function.
If the Aquarium(tank)-computer voltage under 0,5V the 0-10V interface is shut down and the pump can be operated manually. From 0,5V, the interface will take over control of the scheme. In the area of 0,5V-0,8V the pump is switched off. 1V starts the pump at the lowest level (15W) and run. At an increase of 0,5V will increase the level, also. So 1V = 15W 2,5V = 25W….. 5,0V = 50W.
At a higher input voltage remains the Speedycontroller to the maximum setting are available and no longer increases. The interface adapter behaves as if the corresponding would push the button.
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////
